CDR-24 nog steeds in 'Protect' mode
Geplaatst: 10 jan 2021 15:11
Afgelopen week op afspraak bij PC A'dam geweest om het issue met de 2de hands aangeschafte en zelf ingebouwde CDR-24 (als vervanging zeer verouderde PCM2...) op te laten lossen.
Helaas: de CDR-24 blijft nog steeds in 'Protect' mode, ook na twee uur ge-probeer door PCA monteurs(!).
Natuurlijk ook op andere fora gezocht en dan kom ik zaken tegen als:
"The radios are programmed and recognized by the car’s DME and can only be replaced by a shop with a PST2 or PIWIS"
en
"If you are trying to fit this radio (CDR-24) to a different vehicle, then you may find yourself with the Error message of "PROTECT". This stereo is electronically paired, or "Married" to the engine management system of the vehicle it came out of using very sophisticated MOST-BUS system technology. When it is first powered up, it will communicate with the vehicle, and a message of "PORSCHE" will appear on the display whilst this process is in operation. If communication has been successful, it will then operate in the normal way. However, if removed and refitted into a different vehicle other than the original one, it will not recognize the encrypted MOST-BUS identification of the new car, and will instead display an error message of "PROTECT" after around 30 seconds (in mijn geval is dit 'permanent'). This Radio cannot therefore be transferred from one car to another, unless it has first been reset back into its original "Delivery Mode" with the internal MOST-BUS data memory reprogrammed for use with the new vehicle. Porsche Dealers may tell you that this stereo cannot be reprogrammed to go into another vehicle, but then that's what they said about other models, before we managed to reset the MOST-BUS PROTECT system!
We can reset the PROTECT Error message for this radio, allowing it to be used in a different vehicle, but you will need to send the unit to our workshop for this work to be carried out."
Dat laatste, dat heb ik dus getracht; maar als ze het bij PCA al niet gedaan krijgen? Pfff... weet iemand van jullie misschien, hoe ik dit kan oplossen?
Erik
Helaas: de CDR-24 blijft nog steeds in 'Protect' mode, ook na twee uur ge-probeer door PCA monteurs(!).
Natuurlijk ook op andere fora gezocht en dan kom ik zaken tegen als:
"The radios are programmed and recognized by the car’s DME and can only be replaced by a shop with a PST2 or PIWIS"
en
"If you are trying to fit this radio (CDR-24) to a different vehicle, then you may find yourself with the Error message of "PROTECT". This stereo is electronically paired, or "Married" to the engine management system of the vehicle it came out of using very sophisticated MOST-BUS system technology. When it is first powered up, it will communicate with the vehicle, and a message of "PORSCHE" will appear on the display whilst this process is in operation. If communication has been successful, it will then operate in the normal way. However, if removed and refitted into a different vehicle other than the original one, it will not recognize the encrypted MOST-BUS identification of the new car, and will instead display an error message of "PROTECT" after around 30 seconds (in mijn geval is dit 'permanent'). This Radio cannot therefore be transferred from one car to another, unless it has first been reset back into its original "Delivery Mode" with the internal MOST-BUS data memory reprogrammed for use with the new vehicle. Porsche Dealers may tell you that this stereo cannot be reprogrammed to go into another vehicle, but then that's what they said about other models, before we managed to reset the MOST-BUS PROTECT system!
We can reset the PROTECT Error message for this radio, allowing it to be used in a different vehicle, but you will need to send the unit to our workshop for this work to be carried out."
Dat laatste, dat heb ik dus getracht; maar als ze het bij PCA al niet gedaan krijgen? Pfff... weet iemand van jullie misschien, hoe ik dit kan oplossen?
Erik
